Every eyeglass wearer knows that eyeglasses are an investment. And as you know, eyeglasses can sometimes break or get scratched up. When this happens, it's important to have an eyeglass lens replacement. But how do you remove and replace your lenses?
In this article, we'll cover the steps for replacing eyeglass lenses in full-rim frames. This will help keep your eyewear looking new!
- Can I have lenses replaced with my existing frames?
- How do you remove lenses from full-frame glasses?
- How do you put a lens back into a frame?
- How do you attach lenses to metal frames?
- How should lenses fit in frames?
- How do you put lenses in plastic frames?
- Can I bring my own frames to Rx-Able?
- How much does it cost to put new lenses in frames?
Can I have lenses replaced with my existing frames?
If your eyeglasses have been a part of your distinctive appearance for a long time, it's a good idea to replace the lenses with your new prescription.
The quality of the frames, their size, shape, and curvature, as well as your prescription requirements, all have a role in whether or not you can reglaze into your frame. The suggestion is to take the frames to your local store and talk to the staff; they will be able to examine the frames for suitability and provide you with a cost based on your needs.
Place your order online at our store rx-able.com and choose your new favorite replacement.
How do you remove lenses from full-frame glasses?
If you're changing frames or want to clean or adjust your lenses, you'll need to remove them properly. With a little pressure, you can pop the lenses out of plastic frames. You may remove the lenses from metal frames by releasing the screws on either side of the spectacles. To avoid damaging the frames or lenses, use a careful touch.
Here are some replacement steps that may be useful to you:
- First remove the eyewear from your face by either tilting your head back, removing them over your ears or folding the arms down.
- When you want to replace eyeglass lenses, it's important that the eyewear is clean. You can use an eyeglasses cleaner or a solution of water and dish soap with warm water. Get your hands wet before touching the lens surface so as not to leave fingerprints on it. Remove any dirt or debris with a lint-free cloth.
- Clean eyeglasses eyewear by submerging them in the solution and shaking gently to remove any dirt or other particles that might be lurking on the lenses. Rinse, dry, then repeat as needed until there's no more residue left behind. You can also use eyeglass wipes to clean eyeglasses.
- If you anticipate a lot of wear and tear, it's best to use eyeglass lenses in hard or metal frames because they're more durable than glass ones.
- Remove the eyeglass lenses by unscrewing them from the eyewear frame using a screwdriver with an eyeglasses lens removal tool or tweezers. You can also use your fingers if you're careful not to touch any parts of the glasses that have fingerprints on them since this will leave marks on the surface of the eyeglasses.
- Put on a new eyeglass lens by inserting it into the eyewear frame so that it's seated securely and has no gaps. Avoid touching any surface of the lenses with your fingers or fingernails, which can leave marks on them.
- Tighten screws to secure eyeglass lenses in an eyeglass frame.
- Clean eyeglasses eyewear and buff with a lint-free cloth or eyeglass wipes to remove any smudges left behind from the new lens giving your glasses a smooth, clean appearance.
- Alternatively, you can use eyeglass cleaners to clean the eyewear and remove any residue before installing new eyeglass lenses into place.
- For people who have metal frames, there are screws on either side of the frame that need to be removed with a specialized eyeglasses lens removal tool or tweezers. Insert the eyeglass lenses into place and tighten them up.
- If you have eyeglasses with plastic frames, there are two tabs that need to be pushed in at the base of the frame and then they should pop out easily.
How do you put a lens back into a frame?
You'll need to replace your eyeglass frames if they fracture or break. This, however, might be extremely pricey. If your lenses are in good condition, with no scrapes, scratches, or cracks, you can reuse them. It's just a matter of fitting them into plastic eyeglass frames. This is a cost-effective option to purchasing new frames, or at the very least, it will allow you to continue wearing existing glasses while saving money for new wireframes.
Here are some useful ways:
- Take a look at your glasses. Make sure they're in good working order and aren't damaged. Examine the lenses for any cracks or chips, as they are more likely to break if they are fitted into a fresh frame.
- Fill a microwave-safe container partially with water and heat it. Depending on your microwave's power, this should only take a minute. For your frames to be entirely submerged, your container should be slightly larger than they are.
- Soak your frames in a bowl of warm water to soften and malleable them. This, too, should just take a few minutes.
- Close one eye and place one lens in the other. Take note of how they will be arranged in the new frames, including their orientation and side.
- Take the frames out of the heated water and set them aside. Insert one lens through the backside of the frame's proper side. Insert the side closest to the nose rest first, then gently push the lens along the ear rest until the outside edge is close to the ear rest. The lens should be able to click into position.
- Re-immerse the frames in the warm water. If necessary, reheat the water. Remove the frame from the water once it has become malleable again, and repeat Step 5 by placing the second lens into the correct side of the frame. Allow the frames to cool completely before doing it.
How do you attach lenses to metal frames?
Frame and two lenses make up eyeglasses. The frame is the part of the spectacles that are made of metal or plastic. The "arms" are the portions that lay on the ears. The lens is the transparent piece of material in front of your eyes. The frame of the eyeglasses can get slack at times, causing the lens to pop out. With this guide, you'll be able to effortlessly replace a lens in the frame.
Step 1: Identify the screw on the edge hinge of the glasses between of lens and the arms and unscrew it by spinning counterclockwise with the 1.5mm screwdriver.
Step 2: Pull the frames apart gently until the lens can be removed. Make sure you don't pull too hard. A broken frame can only be repaired by taking it to an eye doctor or expert.
Step 3: When you're working with a broken lens, remove the old one. Place the replacement lens in the same spot as the previous one, making sure it's in line with the frame. The glass should have a curvature that points in the front of the frame.
Step 4: Keep the frame stationary by holding it together. Take the screw and, while holding the frame together, screw it back in with the screwdriver, spinning it clockwise.
Step 5: Please ensure the lens is secure after screwing in the screw. Clean the lens with a gentle cotton towel or water if necessary. Cleaning your spectacles with your shirt is not a good idea. Your clothing may have a lot of dust on it, which will harm the glass.
How should lenses fit in frames?
The right pair of glasses can help you see better, boost your self-confidence and allow you to express your unique sense of style. To ensure your new glasses will be as comfortable, flattering, and functional as possible, you must choose frames that fit your face properly.
One of the difficulties of buying glasses online is that it’s harder to get them properly fitted. Sometimes glasses may be too large or too small. Fortunately, the best online store offers good policies rx-able.com which makes it easier.
In general, glasses fit based on the following factors:
- Frame Width
- Arm Length
- Bridge Width
The width of your frame (also known as "total width") should just barely reach past your cheekbones. The frame is overly large if you can fit more than one finger between the arm and the temple. The frame, on the other hand, is too small if the arm and your temple touch. The positioning of your pupils within each lens will be affected by frame width.
The arms of your glasses (also known as "temples") should stretch straight back to your ears, touching just the side of your head immediately in front of your ears. The arms must not bend too soon if they do, the glasses will be pushed down on your nose. It not only makes the glasses appear weird owing to the wrong fit, but it also makes them uncomfortable. The bridge will be subjected to increased pressure, which may result in headaches and sinus issues.
The bridge of your nose (the part that goes over your nose) should be fit, perhaps too tight or too loose. Adjustable nose pads are common on metal glasses, although they are rarely found on acetate frames. By keeping the glasses too high on the face, a too-tight bridge will be uncomfortable and degrade your vision correction. The spectacles will tumble down on your nose if the bridge is too loose, needing regular readjusting.
How do you put lenses in plastic frames?
Here is how it works:
Place a towel on the floor to catch the lenses and any screws that may have gotten misplaced. Remove any screws with caution before removing the lenses. If your frames are one-piece plastic and don't have screws, you'll have to use heat to remove the lenses.
Fill a basin halfway with boiling water. If the lenses did not come out in Step 1, immerse the frames in water for roughly a minute. When you're able to flex the frames, gently press one lens out at a time using your fingertips.
To heat the plastic, place a hairdryer around the lenses. If the hot water method does not work, try this one. The idea is to make the frames malleable, just like with hot water. Do not use force with the lens once more. Apply more heat to the frames and try again if the lens does not pop out the first time.
Insert your new lenses into the old frame while it is still warm and flexible. You may need to use a hairdryer to add a little extra heat or re-soak in hot water. Heat the lenses until they readily pop in.
Can I bring my own frames to Rx-Able?
Yes, you can bring your own eyeglass frames to Rx-Able for eyewear or prescription lenses repair and replacement.
Replacement lenses for eyeglasses can be expensive, especially when you have to buy new frames, lenses, make it scratch resistant, anti reflective, and an eye exam on top of that. These concerns can often dissuade people from getting new glasses of lenses, which can lead to vision problems, especially those who have single visions looking for single vision lenses. This is why the specialists at Rx-able have compiled a list of frequently asked questions so you'll be ready the next time you need new glasses.
It should come as no surprise that each eyeglass store has its own policy for allowing clients to reuse their old frames. When it comes to spectacles lens replacement, Rx-able allows customers to bring in their previous frames. When it comes to your frames, though, they do have a few needs. Let's take a look at what you should be mindful of when it comes to the quality of your frames.
Rx-able encourages consumers to bring in their old frames, and the merchant will inspect them to ensure they are still in good condition. Assume that your frames are clear of scratches, dents, and other impurities at all times. In such a scenario, reusing the frames with your new eyeglass lenses is quite acceptable. However, if the frames are frayed and worn out, it may be time to invest in a new set. While you may be able to get some usage out of your old frames, there is a risk that they will break soon after you get your glasses lenses replaced, costing you more money in the long run.
How much does it cost to put new lenses in frames?
The cost to put new eyeglass lenses in frames varies depending on the type of frame you have. Generally, eyeglasses with metal frames will be more expensive than acetate or plastic frames because they are sturdier and require a lens that has better durability. The lens used for eyeglasses is also dependent upon your prescription strength; eyeglass lenses will be stronger if you need eyewear for high-powered prescriptions (high index lenses) or progressive lenses.
Eyeglass lenses can be expensive to replace if they are not purchased at the same time as eyewear. If you need a new lens or a lens replacement service but you're not sure what kind of replacement lenses are ideal for your frames and needs consider bringing in your old frames with Rx-able for eyeglasses lens replacement and save money next time!
Because of the many options available, selecting replacement lenses can appear to be difficult, but our skilled Rx-able professionals are ready to assist you. You can also visit our website rx-able.com to know more about eyeglass lenses.